Abbildung intAct Test-Power
intAct Test-Power
Test equipment for lead-acid batteries, GEL batteries, AGM batteries, SLA batteries | Battery-changing device

intAct Test-PowerPractical helpers for workshops

that detect performance problems early and simplify battery replacement.

Features

  • Test devices

    With simple menu navigation and automatic test sequence, detect defective batteries before total failure. Easy to read LCD display. For 12 and 24 volt batteries. Suitable for cars, trucks, agricultural machinery, buses and construction vehicles. CBT12XS also for motorcycle batteries. ITP-12 with printout of the test result by thermal printer and case.
  • Battery replacement device

    Error message clearing, battery in logging and other functions for error-free replacement of batteries in vehicles with management system. With ODB2 connector and case.

Details

Item nr. Volt Ampere Length mm Width mm Height mm
CBT12XS12185 - 1250 A (EN)1809040more
intAct Test-Power CBT12XS

CBT12XS

Batterie-Testgerät für 12 V Batterien
Volt:12 V
Weight:0,5 kg
Ampere:185 - 1250 A ( EN)
Size:180 x 90 x 40 mm
Where can I
buy this?
ITP-121250 - 1700 A (EN)22511045more
intAct Test-Power ITP-12

ITP-12

Intact Test-Power ITP-12
Volt:12 V
Weight:1,9 kg
Ampere:10 - 1250 A (EN)
Size:225 x 110 x 45 mm
Where can I
buy this?
OCV12-2412 V / 24 VVoltmeter1005020more
intAct Test-Power OCV12-24

OCV12-24

Intact Test-Power OCV 12/24
Volt:12/24 V
Weight:0,2 kg
Ampere:Voltmeter
Size:100 x 50 x 20 mm
Where can I
buy this?
BRT-12000more
intAct Test-Power BRT-12

BRT-12

AccessoriesBatterie-Wechsel-Gerät
Gewicht:0,68 kg
Where can I
buy this?
H-T-A-CHECK000more

H-T-A-CHECK

AccessoriesAnsmann Energy Check LCD Betterietester
Gewicht:0,5 kg
Where can I
buy this?

Charger Knowledge

Checking the battery step by step
There are many reasons for weakening or failing batteries. An important step in tracking them down is to measure the voltage with a battery tester. Here's how: 1. preparation Disconnect the battery from the vehicle, if possible remove it. Tips on how …
How does a charger work?
In principle, the charger reverses the chemical process that provides the current output in the charged battery. To do this, it provides the battery with voltage (in volts) and current (in amps). The charge controller in the charger decides how much current …
Chargers in a workshop
Especially for workshops, there is another charger that supplies the vehicle with power during diagnoses and software updates on the vehicle electronics. During this phase, the vehicle management system requires a particularly large amount of power and …
When is a multi-voltage charger worthwhile?
Electronic chargers can support different voltages. Depending on whether you only want to charge a car starter battery or also a scooter, motorhome supply battery or drive battery for small vehicles or industrial trucks, it may be worth reaching for a …
Chargers for traction batteries
As with supply batteries, traction batteries are used in cyclic applications, i.e. the batteries are used until they are quite empty and are charged during idle times. Here, the charger is part of an effective drive application. The efficiency of the …
Chargers for rescue and safety vehicles
Emergency and rescue vehicles and other safety-related types of vehicles often sit around for months, but when it comes down to it, they need to be ready at a moment's notice to put out fires, rescue injured people or clear roads. Chargers like the Fronius …
Chargers for supply batteries
In order to supply the connected consumers permanently, supply batteries usually have a larger capacity than starter batteries, which are intended to deliver a lot of power, especially in the short term. Chargers designed for starter batteries reach their …
Charging the vehicle battery now and then
User chargers or consumer chargers are particularly easy to use and easy to maintain. They allow quick charging in between or when the battery is stored for a longer period of time before it is used again, e.g. a starter battery in a classic car that …
Transformer charger versus high-frequency charger
Transformer chargers with a downstream rectifier are relatively inexpensive, but they are large, heavy and less efficient than high-frequency chargers. They allow 1- to 3-step charging methods based on the W-characteristic (W, Wa, WaPuls, W0Wa, WU, WUWa …
Batteries without vent hose
Only conventional, wet batteries need a vent hose, because they gas strongly during operation. The resulting steam can escape through the openings in the plugs. To prevent the vapour from damaging the vehicle, conventional batteries are vented to the …