intAct Race-PowerThe powerful all-rounder
Maintenance-free calcium battery, with good durability and excellent value for money. Increased performance compared to standard starter battery with same box size.
Our recommendation for a low-cost, high-performance starter battery for vehicles with more consumers.
Features
High starting currents
Vehicles with additional consumers, e.g. electrical adjustment options or seat heating, need more current. With a special internal design, this battery delivers more power than a standard starter battery of the same box size.
Your advantage: even if your vehicle needs a lot of starting power, you don't have to constantly recharge this battery.
Clean business
A double lid provides increased leakage protection.
Your advantage: The chance of the battery leaking is lower than with a battery with vent caps.
Price-conscious
The long tested and proven technology enables us to offer excellent products at a reasonable price.
Your advantage: an excellent price-performance ratio.
Characteristics
- Increased performance of up to 15% above the EN standard due to the fully expanding the battery.
- Wet charged. Ready to use.
- Approved for charging voltage up to 14.8 volts.
- Double lid for increased safety.
- Maintenance-free.
All Types
| Battery | Volt | Capacity | CCA | Length mm | Width mm | Height mm | Pos. of terminal | Terminal | |
|---|---|---|---|---|---|---|---|---|---|
| RP44i | 12 | 44 AH (c20) | 420 A (EN) | 207 | 175 | 175 | 0 | 1 | more |
 RP44Japan-Code:{jpn}
RP44Position of Terminal:0
 Volt:12
Terminal:1
  Capacity:44 AH (c20)
Base plate:B13
  Cold Cranking Ampere:420 A (EN)
Size:207 x 175 x 175 mm
 Kasten: LB1 Where can I buy this battery?
Download datasheet
| |||||||||
| RP50i | 12 | 50 AH (c20) | 450 A (EN) | 207 | 175 | 190 | 0 | 1 | more |
RP50Japan-Code:{jpn}
RP50Position of Terminal:0
Volt:12
Terminal:1
Capacity:50 AH (c20)
Base plate:B13
Cold Cranking Ampere:450 A (EN)
Size:207 x 175 x 190 mm
 Kasten: L01 Where can I buy this battery?
Download datasheet
| |||||||||
| RP60i | 12 | 60 AH (c20) | 540 A (EN) | 242 | 175 | 175 | 0 | 1 | more |
RP60Japan-Code:{jpn}
RP60Position of Terminal:0
Volt:12
Terminal:1
Capacity:60 AH (c20)
Base plate:B13
Cold Cranking Ampere:540 A (EN)
Size:242 x 175 x 175 mm
 Kasten: LB2 Where can I buy this battery?
Download datasheet
| |||||||||
| RP62i | 12 | 62 AH (c20) | 540 A (EN) | 242 | 175 | 190 | 0 | 1 | more |
RP62Japan-Code:{jpn}
RP62Position of Terminal:0
Volt:12
Terminal:1
Capacity:62 AH (c20)
Base plate:B13
Cold Cranking Ampere:540 A (EN)
Size:242 x 175 x 190 mm
 Kasten: L02 Where can I buy this battery?
Download datasheet
| |||||||||
| RP71i | 12 | 71 AH (c20) | 670 A (EN) | 278 | 175 | 175 | 0 | 1 | more |
RP71Japan-Code:{jpn}
RP71Position of Terminal:0
Volt:12
Terminal:1
Capacity:71 AH (c20)
Base plate:B13
Cold Cranking Ampere:670 A (EN)
Size:278 x 175 x 175 mm
 Kasten: LB3 Where can I buy this battery?
Download datasheet
| |||||||||
| RP74i | 12 | 74 AH (c20) | 680 A (EN) | 278 | 175 | 190 | 0 | 1 | more |
RP74Japan-Code:{jpn}
RP74Position of Terminal:0
Volt:12
Terminal:1
Capacity:74 AH (c20)
Base plate:B13
Cold Cranking Ampere:680 A (EN)
Size:278 x 175 x 190 mm
 Kasten: L03 Where can I buy this battery?
Download datasheet
| |||||||||
| RP80i | 12 | 80 AH (c20) | 700 A (EN) | 315 | 175 | 175 | 0 | 1 | more |
RP80Japan-Code:{jpn}
RP80Position of Terminal:0
Volt:12
Terminal:1
Capacity:80 AH (c20)
Base plate:B13
Cold Cranking Ampere:700 A (EN)
Size:315 x 175 x 175 mm
 Kasten: LB4 Where can I buy this battery?
Download datasheet
| |||||||||
| RP95i | 12 | 95 AH (c20) | 800 A (EN) | 353 | 175 | 190 | 0 | 1 | more |
RP95Japan-Code:{jpn}
RP95Position of Terminal:0
Volt:12
Terminal:1
Capacity:95 AH (c20)
Base plate:B13
Cold Cranking Ampere:800 A (EN)
Size:353 x 175 x 190 mm
 Kasten: L05 Where can I buy this battery?
Download datasheet
| |||||||||
Accessories
Charger
Fronius Acctiva
Charge starter batteries professionally and supply consumers and on-board electronics.
See product
What is a starter battery?
A battery that is charged by the alternator and starts the vehicle. For this purpose, the starter motor requires a lot of current for a short time. In addition to the cold start capacity (CCA), which indicates how much current the battery can ideally supply, the properties of a battery influence how reliably it can provide this starting power. A battery with very good charging properties recharges more quickly, for example, which benefits vehicles in city traffic in particular. It also supplies the consumers in vehicles without an additional back-up battery or supply battery. The more electrical consumers are installed at the factory or retrofitted, the more capacity is required to supply them when the vehicle is idling or at an engine stop and still reliably restart the vehicle.
Commissioning
A battery that is not fully charged when installed will not reach its full capacity in the future and will have a significantly shortened service life.
Even factory-filled and charged batteries can lose charge during storage. We recommend that you also fully charge them before installation.
You can find out how to do this in our step-by-step guide to charging your battery.
Maintenance and Care
In maintenance-free batteries, the electrolyte is in liquid form. They are usually closed at the factory, often with a double or labyrinth lid in which any gases produced condense and remain in the battery. In normal operation, maintenance-free ones do not lose any liquid. They cannot be opened, refilling is not possible and not necessary.
For which applications is the intAct Race-Power suitable?
| car car, passenger car, cars, automobiles, vans, panel van |
| Tractors For tractors, tractors, axle tractors, tractors, bullodg, tractor tractors and implement carriers. |
| Construction machinery Compatible with construction machinery such as wheel loaders, tracked loaders, excavators and graders. |
| sitting lawn mowers sitting lawn mowers, lawn tractors |
