intAct Bike-Power AGMAffordable all-rounder
Withstands the frequent charging cycles in seasonal use and on many short trips slightly better than conventional flooded batteries and starts reliably even when not fully charged.
Our recommendation for anybody in need of an affordable sealed motorcycle battery.
Features
High power reserve
Due to AGM technology, this battery has a high power reserve and still starts reliably.
Your advantage: If you do not ride your bike regularly and the battery loses charge while standing around, this battery still starts reliably.
High charging currents
AGM technology also allows more reactions at the same time when charging. This helps the alternator while driving as well as an external charger. Which, by the way, may also be stronger here than with a flooded or GEL battery.
Your advantage: Even if you drive a lot of short distances, you don't have to constantly recharge and if it is necessary after all, it doesn't take so long.
Price tip sealed battery
Because the battery is filled by the dealer, it is slightly less leak-proof than a factory-filled AGM battery and cheaper. On the other hand, it is only activated directly before being handed over to the customer or before installation.
Your advantage: You get a low-priced maintenance-free battery.
Characteristics
- High power reserve. Significant starting power even when partially discharged.
- Shake-proof. The plates are firmly embedded in the glass fibre mat.
- Maintenance-free after initial filling by a specialist dealer or workshop. Refilling is then no longer possible and not necessary, because the then sealed battery loses virutally no liquid due to gas recombination.
- Not well suited for repeated deep discharging (below 10.5 volts).
- The battery can also be installed at an angle, as the electrolyte is absorbed in the glass fiber mat and the battery is tightly sealed after filling.
All types
Acid packs may not be delivered to private customers
According to the EU Regulation 2019/1148, acid packs may no longer be delivered to end customers as of 1.2.2021.
intAct Bike-Power AGM
| Battery | Japan-Code | Volt | Capacity | CCA | Length mm | Width mm | Height mm | Pos. of terminal | Terminal | |
|---|---|---|---|---|---|---|---|---|---|---|
| 50314i | YTX4L-BS | 12 | 3 AH (c20) | 50 A (EN) | 113 | 70 | 85 | 0 | A | more |
 50314Japan-Code:YTX4L-BS
50314Position of Terminal:0
 Volt:12
Terminal:A
 Capacity:3 AH (c20)
Base plate:none
Cold Cranking Ampere:50 A (EN)
Size:113 x 70 x 85 mm
 Kasten: M42 Where can I buy this battery?
Download datasheet
| ||||||||||
| 50412i | YTX5L-BS | 12 | 4 AH (c20) | 50 A (EN) | 113 | 70 | 105 | 0 | A | more |
50412Japan-Code:YTX5L-BS
50412Position of Terminal:0
Volt:12
Terminal:A
Capacity:4 AH (c20)
Base plate:none
Cold Cranking Ampere:50 A (EN)
Size:113 x 70 x 105 mm
 Kasten: M43 Where can I buy this battery?
Download datasheet
| ||||||||||
| 50420i | YT4B-BS | 12 | 2,3 AH (c20) | 50 A (EN) | 114 | 39 | 86 | 4 | S-6.3 | more |
50420Japan-Code:YT4B-BS
50420Position of Terminal:4
 Volt:12
Terminal:S-6.3
 Capacity:2,3 AH (c20)
Base plate:none
Cold Cranking Ampere:50 A (EN)
Size:114 x 39 x 86 mm
(m44_keine_s4) Where can I buy this battery?
Download datasheet
| ||||||||||
| 50614i | YTX7L-BS | 12 | 6 AH (c20) | 80 A (EN) | 114 | 71 | 131 | 0 | A | more |
50614Japan-Code:YTX7L-BS
50614Position of Terminal:0
Volt:12
Terminal:A
Capacity:6 AH (c20)
Base plate:none
Cold Cranking Ampere:80 A (EN)
Size:114 x 71 x 131 mm
 Kasten: M45 Where can I buy this battery?
Download datasheet
| ||||||||||
| 50615i | YTX7A-BS | 12 | 6 AH (c20) | 80 A (EN) | 150 | 87 | 94 | 1 | A | more |
50615Japan-Code:YTX7A-BS
50615Position of Terminal:1
 Volt:12
Terminal:A
Capacity:6 AH (c20)
Base plate:none
Cold Cranking Ampere:80 A (EN)
Size:150 x 87 x 94 mm
 Kasten: M46 Where can I buy this battery?
Download datasheet
| ||||||||||
| 50812i | YTX9-BS | 12 | 8 AH (c20) | 120 A (EN) | 150 | 87 | 105 | 1 | A | more |
50812Japan-Code:YTX9-BS
50812Position of Terminal:1
Volt:12
Terminal:A
Capacity:8 AH (c20)
Base plate:none
Cold Cranking Ampere:120 A (EN)
Size:150 x 87 x 105 mm
 Kasten: M47 Where can I buy this battery?
Download datasheet
| ||||||||||
| 51012i | YTX12-BS | 12 | 10 AH (c20) | 130 A (EN) | 150 | 87 | 132 | 1 | A | more |
51012Japan-Code:YTX12-BS
51012Position of Terminal:1
Volt:12
Terminal:A
Capacity:10 AH (c20)
Base plate:none
Cold Cranking Ampere:130 A (EN)
Size:150 x 87 x 132 mm
 Kasten: M48 Where can I buy this battery?
Download datasheet
| ||||||||||
| 51013i | YTX12A-BS | 12 | 10 AH (c20) | 130 A (EN) | 150 | 87 | 105 | 1 | J | more |
51013Japan-Code:YTX12A-BS
51013Position of Terminal:1
Volt:12
Terminal:J
 Capacity:10 AH (c20)
Base plate:none
Cold Cranking Ampere:130 A (EN)
Size:150 x 87 x 105 mm
Kasten: M47 Where can I buy this battery?
Download datasheet
| ||||||||||
| 51214i | YTX14-BS | 12 | 12 AH (c20) | 140 A (EN) | 150 | 87 | 145 | 1 | A | more |
51214Japan-Code:YTX14-BS
51214Position of Terminal:1
Volt:12
Terminal:A
Capacity:12 AH (c20)
Base plate:none
Cold Cranking Ampere:140 A (EN)
Size:150 x 87 x 145 mm
 Kasten: M49 Where can I buy this battery?
Download datasheet
| ||||||||||
| 81401i | YTX14AH-BS | 12 | 12 AH (c20) | 140 A (EN) | 134 | 89 | 166 | 1 | A | more |
81401Japan-Code:YTX14AH-BS
81401Position of Terminal:1
Volt:12
Terminal:A
Capacity:12 AH (c20)
Base plate:none
Cold Cranking Ampere:140 A (EN)
Size:134 x 89 x 166 mm
 Kasten: M50 Where can I buy this battery?
Download datasheet
| ||||||||||
| 81500i | YTX15L-BS | 12 | 13 AH (c20) | 140 A (EN) | 175 | 87 | 130 | 0 | A | more |
81500Japan-Code:YTX15L-BS
81500Position of Terminal:0
Volt:12
Terminal:A
Capacity:13 AH (c20)
Base plate:none
Cold Cranking Ampere:140 A (EN)
Size:175 x 87 x 130 mm
 Kasten: M51 Where can I buy this battery?
Download datasheet
| ||||||||||
| 81600i | YTX16-BS | 12 | 14 AH (c20) | 220 A (EN) | 150 | 87 | 160 | 1 | A | more |
81600Japan-Code:YTX16-BS
81600Position of Terminal:1
Volt:12
Terminal:A
Capacity:14 AH (c20)
Base plate:none
Cold Cranking Ampere:220 A (EN)
Size:150 x 87 x 160 mm
 Kasten: M52 Where can I buy this battery?
Download datasheet
| ||||||||||
| 81601i | YTX16-BS-1 | 12 | 14 AH (c20) | 220 A (EN) | 150 | 87 | 160 | 1 | E | more |
81601Japan-Code:YTX16-BS-1
81601Position of Terminal:1
Volt:12
Terminal:E
 Capacity:14 AH (c20)
Base plate:none
Cold Cranking Ampere:220 A (EN)
Size:150 x 87 x 160 mm
Kasten: M52 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82000i | YTX20L-BS | 12 | 18 AH (c20) | 280 A (EN) | 175 | 87 | 155 | 0 | A | more |
82000Japan-Code:YTX20L-BS
82000Position of Terminal:0
Volt:12
Terminal:A
Capacity:18 AH (c20)
Base plate:none
Cold Cranking Ampere:280 A (EN)
Size:175 x 87 x 155 mm
 Kasten: M53 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82001i | YTX20-BS | 12 | 18 AH (c20) | 280 A (EN) | 175 | 87 | 155 | 1 | A | more |
82001Japan-Code:YTX20-BS
82001Position of Terminal:1
Volt:12
Terminal:A
Capacity:18 AH (c20)
Base plate:none
Cold Cranking Ampere:280 A (EN)
Size:175 x 87 x 155 mm
 Kasten: M53 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82002i | YTX20CH-BS | 12 | 18 AH (c20) | 280 A (EN) | 150 | 87 | 160 | 1 | J | more |
82002Japan-Code:YTX20CH-BS
82002Position of Terminal:1
Volt:12
Terminal:J
Capacity:18 AH (c20)
Base plate:none
Cold Cranking Ampere:280 A (EN)
Size:150 x 87 x 160 mm
Kasten: M52 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82003i | YTX20HL-BS | 12 | 20 AH (c20) | 310 A (EN) | 175 | 87 | 155 | 0 | A | more |
82003Japan-Code:YTX20HL-BS
82003Position of Terminal:0
Volt:12
Terminal:A
Capacity:20 AH (c20)
Base plate:none
Cold Cranking Ampere:310 A (EN)
Size:175 x 87 x 155 mm
Kasten: M53 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82004i | YTX20H-BS | 12 | 18 AH (c20) | 310 A (EN) | 175 | 87 | 155 | 1 | A | more |
82004Japan-Code:YTX20H-BS
82004Position of Terminal:1
Volt:12
Terminal:A
Capacity:18 AH (c20)
Base plate:none
Cold Cranking Ampere:310 A (EN)
Size:175 x 87 x 155 mm
Kasten: M53 Where can I buy this battery?
Download datasheet
| ||||||||||
| 82400i | YTX24HL-BS | 12 | 21 AH (c20) | 350 A (EN) | 205 | 87 | 162 | 0 | A | more |
82400Japan-Code:YTX24HL-BS
82400Position of Terminal:0
Volt:12
Terminal:A
Capacity:21 AH (c20)
Base plate:none
Cold Cranking Ampere:350 A (EN)
Size:205 x 87 x 162 mm
 Kasten: M54 Where can I buy this battery?
Download datasheet
| ||||||||||
| 83000i | YIX30L-BS | 12 | 30 AH (c20) | 350 A (EN) | 169 | 131 | 174 | 0 | A | more |
83000Japan-Code:YIX30L-BS
83000Position of Terminal:0
Volt:12
Terminal:A
Capacity:30 AH (c20)
Base plate:none
Cold Cranking Ampere:350 A (EN)
Size:169 x 131 x 174 mm
 Kasten: M55 Where can I buy this battery?
Download datasheet
| ||||||||||
| 85001i | YTX50L-BS | 12 | 21 AH (c20) | 290 A (EN) | 205 | 86 | 161 | 0 | A | more |
85001Japan-Code:YTX50L-BS
85001Position of Terminal:0
Volt:12
Terminal:A
Capacity:21 AH (c20)
Base plate:none
Cold Cranking Ampere:290 A (EN)
Size:205 x 86 x 161 mm
 Kasten: M56 Where can I buy this battery?
Download datasheet
| ||||||||||
Accessories
Charger
DEFA workshop chargers
Powerful workshop charger.
Protects onboard electronics and battery while working on the vehicle.
See product
What is a motorcycle battery?
A battery that primarily starts the motorcycle. For this, the starter motor needs a lot of power for a short time. Important for this is the cold start power (CCA) that the battery provides, but also the characteristics. A battery with a high current reserve will start the motorcycle even partially charged, for example.
In addition, the motorcycle battery supplies the electrical consumers, since it is the only battery in the motorcycle. The more consumers are installed, especially retrofitted safety or entertainment features, the more capacity is needed so that the consumers are also supplied at idle or when the engine is off or the machine still starts after the consumers have been used.
Commissioning
Dry pre-charged batteries must be filled with battery acid and charged before installation.
A battery that is not fully charged when installed will not reach its full performance in the future and will have a significantly shortened service life.
Immediately after the first filling with acid, dry pre-charged batteries only reach 75 to 80 % of their rated power. They must therefore be charged before installation.
Even factory-filled and charged batteries can lose charge during storage. We recommend that they are also fully charged before installation.
You can find out how to do this in our step-by-step guide to charging your battery.
Maintenance and Care
This battery is maintenance free after initial charging.
In this it differs from other dry pre-charged batteries which are low maintenance.
Due to the AGM technology, only a little gas is produced in the battery, which is discharged via the safety valve. So almost no liquid is lost. It cannot and must not be opened again.
For which application is the intAct Bike-Power AGM suitable?
| motorcycles motorcycle, motorcycles, light motorcycle, light motorcycles, Mokick, |
| Quad, ATV Sports and leisure vehicles and work vehicles for off-road use (ATV = All Terrain Vehicles) with motorcycle seat, handlebars and four wheels, also four-wheel drive. |
| Scooter Motor-Scooter, Motor-Roller, Roller |
| sitting lawn mowers sitting lawn mowers, lawn tractors |
| Snowmobile Snowmobile, snow motorcycle |
| Jetski Jetski, also PWC (Personel watercraft) or Sea-Doo |
| UTV UTV (Utility Vehicle), also known as buggy or side-by-side, are commercial vehicles and leisure vehicles with seats arranged side by side and a steering wheel. |
