Abbildung DEFA showroom chargers
DEFA showroom chargers
Chargers for closed and sealed lead-acid batteries: Flooded, calcium, GEL, AGM, EFB as well as partially lithium batteries

DEFA showroom chargersDiscreet at the dealership

.
With its power-supply function, the charger supplies the consumers during demonstrations, fittings and inspections and gently keeps the battery fully charged.
Our recommendation for charging starter batteries in the car dealership.

Features

  • Perfect for demonstrations

    In the showroom, the battery is particularly challenged: Lighting and electronics are activated every time the doors are opened, but the engine and alternator cannot charge the battery. This charger is designed exactly for this use and keeps all functions active and battery charged without overloading the battery.

    Your advantage: Your vehicles are always ready for test drives and sales without battery replacement.

  • Unobtrusive

    The compact design, detachable cables and clever mountings allow the charger to be placed almost invisibly under the vehicle or even in the engine compartment.

    Your advantage: powerful function without distracting from the object on display.

  • Versatile

    Thanks to the intelligent technology, all lead-acid batteries used in the automotive sector and, with the DEFA ShowroomCharger 50A, also lithium batteries are charged safely and reliably.

    Your advantage: Charge all vehicles in your exhibition or collection with one type of charger.

Characteristics

  • User-friendly and fully automatic high-frequency charger.
  • 7-phase charger with trickle charging over an unlimited period of time as well as analysis before and after charging.
  • Suitable for flooded 12-volt starter batteries including calcium batteries also with 14.7-volt charge voltage, for sealed AGM, GEL, MF and SLA batteries as well as for start-stop batteries, both Enhanced Flooded Batteries (EFB) and AGM batteries.
  • DEFA ShowroomCharger 50A also suitable for lithium batteries.
  • Protection against reverse polarity, contact spark and short circuit. With galvanic isolation.
  • Discreet. Made of black anodised aluminium and noiseless.
  • Invisible placement. Removable cables can be routed through the engine compartment.
  • Charge status readable via LED. Error indication via flashing light.
  • Software update possible via micro USB interface.

Details

Item nr. Volt Ampere Length mm Width mm Height mm
DEFA-SR-32123221912562more
DEFA Showroomladegeräte DEFA-SR-32

DEFA-SR-32

Power
Connection voltage:230 V
Connection current:32 A
DC voltage:12 V
DC current:32 A
Size:219 x 125 x 62 mm
Weight:3,5 kg
Where can I
buy this?
DEFA-SR-50125028017585more
DEFA Showroomladegeräte DEFA-SR-50

DEFA-SR-50

Power
Connection voltage:230 V
Connection current:50 A
DC voltage:12 V
DC current:50 A
Size:280 x 175 x 85 mm
Weight:6,8 kg
Where can I
buy this?

Charger Knowledge

Transformer charger versus high-frequency charger
Transformer chargers with a downstream rectifier are relatively inexpensive, but they are large, heavy and less efficient than high-frequency chargers. They allow 1- to 3-step charging methods based on the W-characteristic (W, Wa, WaPuls, W0Wa, WU, WUWa …
Batteries without vent hose
Only conventional, wet batteries need a vent hose, because they gas strongly during operation. The resulting steam can escape through the openings in the plugs. To prevent the vapour from damaging the vehicle, conventional batteries are vented to the …
Safety instructions for handling acid
Battery acid consists partly of sulphuric acid, which is highly corrosive. It attacks your skin, textiles and even metal. Put on protective clothing! So always wear gloves, safety glasses and possibly an acid-proof apron when handling batteries. Choose …
Cleanliness pays off
To ensure proper battery function, it makes sense to keep the battery surface clean and dry. Greasy or silicone-containing dirt on the lid can hinder the flow of current. Moisture on the battery can cause a short circuit in the worst case.
Chargers for traction batteries
As with supply batteries, traction batteries are used in cyclic applications, i.e. the batteries are used until they are quite empty and are charged during idle times. Here, the charger is part of an effective drive application. The efficiency of the …
Which charger for which battery type?
The most important distinction is that sealed batteries and especially lithium batteries can react extremely to the heat and overpressure during overcharging. A reliable cut-off is particularly important here. Modern fully automatic electronic chargers …
Chargers for supply batteries
In order to supply the connected consumers permanently, supply batteries usually have a larger capacity than starter batteries, which are intended to deliver a lot of power, especially in the short term. Chargers designed for starter batteries reach their …
Checking the battery step by step
There are many reasons for weakening or failing batteries. An important step in tracking them down is to measure the voltage with a battery tester. Here's how: 1. preparation Disconnect the battery from the vehicle, if possible remove it. Tips on how …
When is a multi-voltage charger worthwhile?
Electronic chargers can support different voltages. Depending on whether you only want to charge a car starter battery or also a scooter, motorhome supply battery or drive battery for small vehicles or industrial trucks, it may be worth reaching for a …
Chargers for rescue and safety vehicles
Emergency and rescue vehicles and other safety-related types of vehicles often sit around for months, but when it comes down to it, they need to be ready at a moment's notice to put out fires, rescue injured people or clear roads. Chargers like the Fronius …