Battery knowledge

ABSOLUTELY MAINTENANCE-FREE
LOW-MAINTENANCE
PLATE
POLARITY
SHIFT
SAFETY RESERVE
CONSUMER
SEALED BATTERY
MAINTENANCE FREE
PLATE
WATT
WATT-HOUR
IntAct Bike-Power AGM
IntAct Bike-Power Classic
IntAct Bike-Power GEL
IntAct Bike-Power HVT
Intact Bike-Power Lithium
PLATE PACKAGE
CAPACITY
CONNECTION POL
ELECTROLYSE
LEAK PROOF
BALANCING
BATTERY BOX
BATTERY CARE
BATTERY WATER
DOUBLE LID WITH LABYRINTH
ELEKTROLYTE
COLD START POWER
DEGASING
DISCHARGE VOLTAGE
FILL HEIGHT
GAS RECOMBINATION
FIBERGLASS FLEECE
HVT
HYDROMETER
intAct Bike-Power SLA
Why do we recommend charging the intAct Bike-Power AGM regularly with a charger despite the high cold start performance and good current reserve?
With many short journeys or long standstill times, the charge level continues to build up. This means that the battery receives less energy from the alternator than it needs for starting. Its charge level gradually drops. Once a battery is discharged …
What does absolutely maintenance-free mean?
Absolutely maintenance-free batteries are valve-regulated lead-acid batteries or VRLA batteries (VRLA = Valve Regulated Lead-Acid) that are sealed at the factory. Here, significantly less gas is produced than in wet batteries. The gas produced remains …
What is a motorcycle battery?
A battery that primarily starts the motorcycle. For this, the starter motor needs a lot of power for a short time. Important for this is the cold start power (CCA) that the battery provides, but also the characteristics. A battery with a high current …
When liquid is lost
Fluid evaporates in batteries during the chemical reaction to generate electricity, more so in a wet battery than in an AGM or GEL battery where the acid is fixed in non-woven or as GEL respectively. Unlike these sealed batteries, the vapor in the sealed …
What does pole growth on the battery mean?
Whitish-grey deposits on the poles, so-called "pole growth", is caused by strong sulphation on the plates. Tip: Always ensure a good state of charge.
A coherent equation: A lot out, a lot in.
Every battery loses power over time. If it is loaded normally and is always fully charged, the capacity is slowly reduced. If it is often overloaded and insufficiently charged, the capacity is reduced much more quickly, i.e. the battery ages much faster. Ideally, …
What does low maintenance mean?
Low-maintenance batteries can be recognised by the removable sealing plugs on the top, the vent hose and the white or transparent housing. In these batteries, the electrolyte is in liquid form, i.e. it is not bound as GEL or in fleece. They are not sealed …
Chargers for rescue and safety vehicles
Emergency and rescue vehicles and other safety-related types of vehicles often sit around for months, but when it comes down to it, they need to be ready at a moment's notice to put out fires, rescue injured people or clear roads. Chargers like the Fronius …
Safety instructions for handling acid
Battery acid consists partly of sulphuric acid, which is highly corrosive. It attacks your skin, textiles and even metal. Put on protective clothing! So always wear gloves, safety glasses and possibly an acid-proof apron when handling batteries. Choose …
Identifying and filling the liquid level
Markings on the outside of the white or transparent housing of a wet battery indicate the minimum (MIN) and maximum (MAX) fill levels. During commissioning or initial filling, the battery must be filled with battery acid up to the upper mark (MAX). During …

What is a motorcycle battery?

A battery that primarily starts the motorcycle. For this, the starter motor needs a lot of power for a short time. Important for this is the cold start power (CCA) that the battery provides, but also the characteristics. A battery with a high current reserve will start the motorcycle even partially charged, for example.
In addition, the motorcycle battery supplies the electrical consumers, since it is the only battery in the motorcycle. The more consumers are installed, especially retrofitted safety or entertainment features, the more capacity is needed so that the consumers are also supplied at idle or when the engine is off or the machine still starts after the consumers have been used.

 

Commissioning

value2

Maintenance and Care

value3