×
Battery-Guard Support

How many Battery Guards can be recorded or managed in the app?

Want to keep track of all your batteries? No problem! With the intAct Battery-Guard and our practical app, you can always keep an eye on your starter and supply batteries. But how many devices can you actually manage at the same time? We'll enlighten you!

Unlimited possibilities for your battery monitoring

The good news first: there is no limit to the number of Battery Guards you can register in our app. Whether you are a passionate camper with several vehicles or own a whole fleet of cars or motorcycles - our app keeps up!

The dashboard: your overview of four devices

The four most recently synchronized Battery Guards are always displayed on the dashboard of your app. This is super handy for getting a quick overview of the status of your most important batteries.
The graphic shows a smartphone which displays several connected devices in the Battery Guard app.

All devices under control: it's that simple

You have more than four Battery-Guards? No problem! All registered devices remain stored in the app and are busy collecting battery data. To synchronize the data of a device and display it on the dashboard, simply select it.

The fastest way to display and synchronize a device

Switch to the display of a single device. In the upper area you will see the name you have assigned and the serial number of the device. You can now select another registered device from the pull-down menu.
The graphic shows the selection of different devices in the pull-down menu in the intAct Battery Check app.
The selected device now appears on the dashboard in the individual view.

This allows you to change a device in the quad overview and make it permanently visible:

Switch to the battery overview with the quad display. Press and hold the device you want to replace for 2-3 seconds or click on "Remove" and confirm with "OK".
The graphic symbolizes the deletion of a device from the Battery-Guard app.

Now tap on the plus symbol and select the desired device from the list.
The image shows a graphic in which the addition of a new device in the Battery-Guard app is shown.

Important to know:
Even if a device is not displayed on the dashboard, it continues to collect data.
To save a device's data permanently, you must synchronize it regularly (within 72 days).
With these simple steps, you will always have a full overview of all your batteries.

 

Professional advice: If you have any questions about configuring your Battery-Guard or caring for your batteries, don't hesitate to contact a specialist.

We hope this blog post has helped you answer the questions about managing the devices in your intAct Battery-Guard.

Cancel
OK
Close